How To Repair Your Pod In Star Wars Pod Racer

While the debates surrounding the prequels will proceed for decades – possibly with less heat following more recent releases – merely few deny the spectacle that was witnessing the Boonta Eve Archetype.

Star Wars Episode ane: Racer represents a classic historic period of Star Wars in gaming, with the Nintendo 64 release being fondly remembered for its deep roster of pod racers to unlock, range of tracks, and the ability to upgrade podracers.

Now, Star Wars Episode ane: Racer is dorsum every bit basically the same game but on modern consoles, thanks to developers Aspyr.

To help you lot jump directly into a podracer and have on the likes of Dud Bolt, Gasgano, Ratts Tyerell, Ben Quadinaros, and Sebulba, the table beneath contains all of the Switch controls for Star Wars Episode i: Racer.

Star Wars Episode 1 Racer Switch Controls

With more than controller buttons and formats available, there are a few different ways to play Racer on the Nintendo Switch, from advanced dual joy-con controls to unmarried joy-con controls.

For the purposes of these podracer controls, the analogues are noted as (L) and (R), with the buttons on the d-pad shown equally Up, Right, Downwardly, and Left. If you need to printing an analogue to activate its push button, (L3) or (R3) volition be shown.

Action	Racing Controls	Classic Controls	Unmarried Joycon
Accelerate	ZR	A	Correct
Steer	(50)	(50)	(L)
Slide	ZL / Y	ZR / ZL	SL
Repair	R	R	SR
Look Behind	Fifty	Downwardly	(L3)
Change View	Up / Down	Up	Up (double tap)
Weapon / Taunt	10	N/A	SR (double tap)
Heave	A	North/A	N/A
Air Brakes	B	B	Down
Curl Left	(R)	Y	Left
Roll Right	(R)	X	Up
Toggle Map	–	L	Left (double tap)
Pause	+	+	– / +

How to use Boost in Star Wars Episode 1: Racer

While using the Racing Controls for Star Wars Episode 1: Racer, y'all're given the pick to utilize a boost.

To activate the boost, you first need to reach full speed. You'll know that yous're going at total pace when the curved bar to the bottom right of the screen fills upwardly to turn the dot at the acme of the bar green.

Next, yous'll need to button forward the left analogue to make your podracer to get even faster. Doing this will result in the full blue curved bar being taken over by a ruby bar.

You accept to maintain speed and not steer as well far either side: otherwise, the filling of the bar will exist disrupted.

If yous manage to bulldoze straight for long enough while pushing forward on the left analogue, the bar will make full red, and the dot at the meridian will turn xanthous.

When the yellow dot shows, you can then press the boost button (A) to activate a tremendous speed boost. While you hold down the accelerate button (ZR), yous'll continue to boost.

Nevertheless, boosting for a prolonged flow will start to damage your engines. So, when the temperature warning starts to show in the lesser left of the screen, information technology's a proficient idea to release the accelerator for a second to drop speed and avoid overheating.

Once y'all've evaded the 'Temp Warning,' you'll notice that the coloured curved bar has receded. To perform some other heave, get back up to full speed again, push the left analogue forwards, and press boost.

It should be noted that steering while boosting is significantly hampered, simply one of the quickest ways to regain control is to release the accelerate button just before pulling off a manoeuvre.

Now you know the controls needed to take on the galaxy's greatest racers and unlock the podracers for your own use.

How to hover over gaps and deadening your landing in Star Wars Racer

One aspect that will frustrate many podracers is the inability to simply hover over pocket-size gaps.

Others will accept also found trouble with taking severe damage when landing from big jumps, or not fifty-fifty being able to fly far enough to get to the other side of a large bound.

In the later races, such as Dethro's Revenge on Ord Ibanna, being able to hover and slow your descent becomes a necessity.

And so, when you see a short gap coming up, want to stay in the air for longer, or desire to soften a landing, pull back on the left analogue.

This will tedious your speed, but it redirects your thrusters to permit you lot to maintain track tiptop when going over gaps. This activity will besides slow your descent, which means that y'all can fly further and land slower.